$137.93
COMPLETE BED BUG ELIMINATION PLAN DIY Pest & Lawn – The Pro-Grade Multi-Step Kit for Total Control
The Problem Bed bugs multiply fast—one pregnant female can lead to 13,000+ bugs in 6 months. They hide deep in seams, cracks, and furniture joints, feeding at night and vanishing by day. Without a complete treatment cycle, they always return.
STEP 1: PREPARATION (Day 1) Declutter & Contain
Clear the Room: Remove items not needed or wanted. Bag all clothing, linens, and personal items and take them out of the room before treatment.
Do Not Transfer: Do not move infested items to clean rooms as this spreads the infestation.
Mattress Assessment: Discard mattresses if heavily infested or torn; otherwise, treat thoroughly and encase with bed bug-proof covers.
Clean & Launder
Wash & Dry: Wash all bedding and clothes in hot water and dry on high heat for 20+ minutes.
Isolate: Place non-washable items in sealed bins with vapor strips for 7–10 days.
Storage: Store cleaned items in sealed bags until the room is bed bug-free for 30 days.
STEP 2A: D-Fense NXT & Bedlam Plus Crack, Crevice, and Fabric Treatment
Where to Spray: Apply to mattress seams, tufts, folds, and stitching. Treat bed frame joints, drawer slides, under beds, and behind headboards.
Why It Works: Bedlam Plus kills resistant adults and eggs on contact. D-Fense NXT provides residual kill for up to 4 weeks. The dual-mode action targets eggs, nymphs, and adults across multiple surfaces.
STEP 2B: Demand Duo + Gentrol IGR Initial Knockdown & Sterilization
Mixing: Add 1 oz Demand Duo + 1 oz Gentrol IGR per 1 gallon of water. Shake well before and during use.
The 24-Hour Strategy: Apply heavily on Day 1. If you have leftover mixture, re-apply on Day 2 (within 24 hours of mixing) to ensure maximum saturation.
Important: Any product mixed in the sprayer must be used within 24 hours. Do not store mixed solution longer than 1 day.
Where to Apply: Spray all baseboards, behind furniture, wall-floor junctions, and around bed frames.
STEP 3: CIMEXA DUST Long-Term Crack & Void Protection
Application: Remove faceplates from outlets and switches. Apply a light film of dust into wall voids and baseboard cracks.
Why It Works: Cimexa dehydrates bed bugs on contact and remains active for up to 12 months.
STEP 4: CYPER WSP BARRIER The Follow-Up Defense
Switch Products: After the initial Demand Duo treatment, switch to Demon WP or Cyper WSP for your weekly follow-ups to prevent resistance.
Mix & Apply: Add water-soluble packets to water according to label directions. Fill sprayer halfway, add product, then top with water and shake vigorously.
Storage Rule: Use within 24 hours. Do not store diluted spray.
Where to Apply: Spray around all baseboards, under beds, and along room edges.
STEP 5: REPEAT (Every 7–10 Days)
Consistency is Key: Bed bugs hatch every 7–14 days. You must repeat Step 2A and Step 4 until no one is being bitten and no live bugs or blood spots are found.
Duration: Typical duration is 7–8 weeks for complete eradication.
$137.93
COMPLETE BED BUG ELIMINATION PLAN DIY Pest & Lawn – The Pro-Grade Multi-Step Kit for Total Control
The Problem Bed bugs multiply fast—one pregnant female can lead to 13,000+ bugs in 6 months. They hide deep in seams, cracks, and furniture joints, feeding at night and vanishing by day. Without a complete treatment cycle, they always return.
STEP 1: PREPARATION (Day 1) Declutter & Contain
Clear the Room: Remove items not needed or wanted. Bag all clothing, linens, and personal items and take them out of the room before treatment.
Do Not Transfer: Do not move infested items to clean rooms as this spreads the infestation.
Mattress Assessment: Discard mattresses if heavily infested or torn; otherwise, treat thoroughly and encase with bed bug-proof covers.
Clean & Launder
Wash & Dry: Wash all bedding and clothes in hot water and dry on high heat for 20+ minutes.
Isolate: Place non-washable items in sealed bins with vapor strips for 7–10 days.
Storage: Store cleaned items in sealed bags until the room is bed bug-free for 30 days.
STEP 2A: D-Fense NXT & Bedlam Plus Crack, Crevice, and Fabric Treatment
Where to Spray: Apply to mattress seams, tufts, folds, and stitching. Treat bed frame joints, drawer slides, under beds, and behind headboards.
Why It Works: Bedlam Plus kills resistant adults and eggs on contact. D-Fense NXT provides residual kill for up to 4 weeks. The dual-mode action targets eggs, nymphs, and adults across multiple surfaces.
STEP 2B: Demand Duo + Gentrol IGR Initial Knockdown & Sterilization
Mixing: Add 1 oz Demand Duo + 1 oz Gentrol IGR per 1 gallon of water. Shake well before and during use.
The 24-Hour Strategy: Apply heavily on Day 1. If you have leftover mixture, re-apply on Day 2 (within 24 hours of mixing) to ensure maximum saturation.
Important: Any product mixed in the sprayer must be used within 24 hours. Do not store mixed solution longer than 1 day.
Where to Apply: Spray all baseboards, behind furniture, wall-floor junctions, and around bed frames.
STEP 3: CIMEXA DUST Long-Term Crack & Void Protection
Application: Remove faceplates from outlets and switches. Apply a light film of dust into wall voids and baseboard cracks.
Why It Works: Cimexa dehydrates bed bugs on contact and remains active for up to 12 months.
STEP 4: CYPER WSP BARRIER The Follow-Up Defense
Switch Products: After the initial Demand Duo treatment, switch to Demon WP or Cyper WSP for your weekly follow-ups to prevent resistance.
Mix & Apply: Add water-soluble packets to water according to label directions. Fill sprayer halfway, add product, then top with water and shake vigorously.
Storage Rule: Use within 24 hours. Do not store diluted spray.
Where to Apply: Spray around all baseboards, under beds, and along room edges.
STEP 5: REPEAT (Every 7–10 Days)
Consistency is Key: Bed bugs hatch every 7–14 days. You must repeat Step 2A and Step 4 until no one is being bitten and no live bugs or blood spots are found.
Duration: Typical duration is 7–8 weeks for complete eradication.
